Cas

Performance Pro Artesian 2

is the perfect choice for high efficiency and reliability combined with the

convenience of self-priming. Molded of corrosion-resistant polypropylene. Artesian 2 pumps are ideal for applications in which the pump is positioned above the water level. An easy-open Lexan Lid provides ready access to the integral strainer pot's Large Basket.

Available in 1/8 to 1/2 hp at 1725 rpm and 1/2 to 3 hp at 3450 rpm

Features & Benefits

* Money saving high efficiency pump and motor units.

* Wide rnge of performance conditions can be matched.

* Self priming design allows for suction lift placement.

* Two inch unions and tailpieces are included for easy installation.

* Impeller intercharngeability.

* Ready for hard wiring or can choose factory attached power cords.

*Dual voltage motors are avaible for most sizes.

* Both pumps and motor are designed for quiet operation.

* Salt water kits avaiable.

* Safety first - out of pond pumps help protect both you and your first from annoying and potentially dangerous oi or electrical leaks.

3 YEAR LIMITED WARRANTY

2" Female NPT Suction and Discharge Ports.

All 1725 RPM Motors are enclosed for extra protections and long life.

Shaft Seals are 316 Stainless Steel.

A 16 AWG, 8ft cord with 115 Volts plug is optional.[1725 rpm,1/2HP max.

A 12 AWG,8ft. Cord with 115 Volt plug is optional.[3450 rpm, 1 hp max.]

Saltwater kits are available $121.00

  • Casade Low RPM

    THIS PUMP INSTALLS

    NO MORE THAN 2' ABOVE WATER LEVEL.

    Note: THIS PUMP PUSHES WATER THROUGH THE OUT PUT

    BETTER THAN IT PULLS IT FROM THE POND FLOOR TO THE PUMP.

    Needs a Priming Pot to Catch Debris

    before it goes thru the pump.

    High efficiency, industrial grade pump Ideal for your pond, water feature, or general transfer and recirculation needs. Cascade pumps produce excellent flow rates at sufficient pressure [head] to really get the job done. The industrial grade polypropylene housing is built for long term use. A strainer pot may be attached to facilitate priming and to strain the inflow. Available in 1/8 to 1/4 hp@ 1725 rpm and 1/3 to 2 hp at 3450 rpm.

    • Money saving high efficiency
    • Long life, corrosion resistant, 316 Stainless Steel shaft seals
    • Impeller interchangeability allows you to easily change your pump's performance.
    • To of the line U.S. motor. All 1725 rpm units are totally enclosed for excellent protection and long term reliability
    • Both pump ends and motors are designed for quiet operation.
    • 3 year limited warranty
    • Large Pumps it is better to Wire for 230 so that the pump last longer.
    • Electrical Costs to run the pumps is the same.
    • To change the Wiring from 110 to 220 go to cap in the back of pump.

       

       

       

      Unscrew the 1/4" Bolt

       

       

       

       

       

      L1 and L2 are for the cord to be wired in.

      Black Cap needs to be twisted with plyer to eith 110 or 220.

      That Simple.

    SKU H.P. Voltage Max Head
    Max flow
    Price

    Shoppingcart

    C1/8-26-C

    Casade Low RPM

     

     

     

    1/8 115/230 20

    2616GPH@4'

    $626.00

    FREE SHIPPIN0

    SUGGESTED RETAIL $685.00

    QUICKLY DISCOUNTED TO $626.00

     

     

     

     

     

     

    Strainer Basket WILL BE NEED

    SEE Below

    C1/8-36-C

    Casade Low RPM

     

     

     

     

    1/8

    115/230

    Watts 202

    @ 50 GPM

    16

    3612

    GPH@7.5'

    $660.00

    FREE SHIPPING

    SUGGESTED RETAIL $612.00

    QUICKLY DISCOUNTED TO $660.00

     

     

     

     

     

    BUY NOW
     

     

    Strainer Basket WILL BE NEED

    SEE Below

     

    C1/4-44-C

    Casade Low RPM

     

     

     

     

     

    1/4
    115/230
    22

    4404

    GPH@10''

    $712.00

    FREE SHIPPING

    SUGGESTED RETAIL$795.00

    QUICKLY DISCOUNTED TO $712.00

     

     

     

     

     

    Strainer Basket WILL BE NEED

    SEE Below

     

    C1/4-49-C

    Casade Low RPM

     

     

     

     

    1/4
    115/230
    23 4944@13'

    $770.00

    FREE SHIPPING

    SUGGESTED RETAIL$825.00

    QUICKLY DISCOUNTED TO $770.00

     

     

     

     

     

     

    Strainer Basket WILL BE NEED

    SEE Below

     

     

     

  • Dimensions :

    Aprox. 8.86" L (without fittings)

    x 10.42" H

    SKU

    Description

    Strainer Baske for the

    Cascade pumps Above

    Price
    Shoppingcart
    SB200

    2" MNPT Inlet Port and 2" Slip Discharge Port

    • Works with many external pumps that have a 2" FPT inlet
    • Comes complete with Clear Lid, O-rings, drain plug, 2" MPT Intake and 2" Slip Discharge Fittings
    $123.00
    BUY NOW

     

  • THIS PUMP CAN BE INSTALLS UP TO 3' ABOVE WATER LEVEL.
    THIS PUMP PULLS WATER FROM POND FLOOR TO PUMP BETTER
    THAN IT PUSHES WATER UP WARD.
  •  

    ARTESIAN 2 LOW RPM [with Cord]

    PerformancePro Artesian2   External Centrifugal Pump:

    Artesian2 is the perfect choice for high efficiency and reliability combined with the convenience of self-priming. Molded of corrosion-resistant polypropylene.

    Artesian2 pumps are ideal for applications in which the pump is positioned above the water level. An easy-open Lexan lid provides ready access to the integral strainer pot’s large basket. Out of Pond Use Only!

    Product Specifications:

    • Includes Factory Installed - 115V - 16AWG - 8ft Long - 3 Prong Grounded Cord (can be ordered without the cord)
    • 115V 60hZ - US Power
    • 17' Maximum Head/Shut Off.
    • Designed for Continuous Use and quiet operation
    • Top of the line motors. Totally enclosed for excellent protection and long term reliability.
    • Both pump end and motor are designed for quiet operation
    • Built in Priming Pot (Leaf Trap) with clear lexan lid
    • Optional Salt Water Kit - Includes PVC shaft sleeve and PTFE coated S.S. seal w/ SiC faces
      installed in pump by the factory. (additional charge applies)
    • Long life corrosion resistant 316 stainless steel shaft seals
    • 2" FNPT Inlet Port/2" FNPT Discharge Port with Included 2" unions (Qty 2)
    • Safety first out of water (external) pumps help protect you from annoying and potentially dangerous oil or electrical leaks.
    • 3 Year Limited Manufacturers Warranty (For freshwater applications)
    • Made with care in the U.S.A.

    [Blue Sku] is Old Artesian the New Artesian 2 Replaces. Larger Motor and Larger Priming Pot.

  • 2" FNPT Inlet Port/2" FNPT Discharge Port with Included 2" unions (Qty 2)
  • SKU H.P. RPM Voltage HZ Max Watt

    Watts

    @

    Max head

    Watts @ Max flow Price

    Shoppingcart

     

    A2-1/8-39-C

    [A1/8-35]

    ARTESIAN 2 LOW RPM [with Cord]

    1/8 1725 115/230 50/60 202@50 GPM 17ft.

    165@

    3900 GPH@

    3'

     

     

    $974.00

    FREE SHIPPING

     

    A2-1/4-58-

    [A1/4-49]

     

     

    SKU H.P. RPM Voltage HZ Max Watt

    Watts

    @

    Max head

    Watts @ Max flow Price

    Shoppingcart

     

    A2-1/8-39-C

    [A1/8-35]

    ARTESIAN 2 LOW RPM [with Cord]

    1/8 1725 115/230 50/60 202@50 GPM 17ft.

    165@

    3900 GPH@

    3'

     

     

     

     

    $895.00

    FREE SHIPPING

     

    SUGGESTED RETAIL$990.00

    QUICKLY DISCOUNTED TO $895.00

     

    A2-1/4-58-C

    [A1/4-49]

     

     

     

    1/4 1725 115/230 50/60 360 23ft

    320@

    5760

    GPH@5'

     

     

    $974.00

    FREE SHIPPING

    SUGGESTED RETAIL$1,140.00

    QUICKLY DISCOUNTED TO $974.00

     

     

    A2-1/3-63-C

     

    1/3 1725 115/230 50/60 450 26'

    6300

    GPH@6

     

     

     

    $1,025.00

    FREE SHIPPING

    SUGGESTED RETAIL$1,259.00

    QUICKLY DISCOUNTED TO $1,025.00

     

     

    BUY NOW
    $1,025.00

    A2-1/2-76

     

    1/2 1725 115/230 50/60 630

    260

    @26'

    7560

    GPH@8'

    $1,089.00

    FREE SHIPPING

    SUGGESTED RETAIL$1,259.00

    QUICKLY DISCOUNTED TO $1,089.00

     

     

     

     

    BUY NOW

    $1,089.00

     

     

    1/4 1725 115/230 50/60 360 23ft

    320@

    5760

    GPH@5'

     

    ADD A CORD TO PUMP

    $902.00

    $884.00
    FREE SHIPPING

     

                     

     

                     
  • ARTESIAN 2 HIGH RPM [With Out Cord]

    PerformancePro Artesian2   High Flow - External Centrifugal Pump:

    Artesian2 is the perfect choice for high efficiency and reliability combined with the convenience of self-priming. Molded of corrosion-resistant polypropylene. Artesian2 pumps are ideal for applications in which the pump is positioned above the water level. An easy-open Lexan lid provides ready access to the integral strainer pot’s large basket. Out of Pond Use Only!



    Product Specifications:

    • 115V - 8ft. 3 prong grounded Cord - NOT INCLUDED - OPTIONAL
      See manual below for hard/direct wiring instructions.
    • 115V / 208-230V - 60hZ
    • 55' Maximum Head/Shut Off.
    • Designed for Continuous Use and quiet operation
    • Top of the line motors. Totally enclosed for excellent protection and long term reliability.
    • Both pump end and motor are designed for quiet operation
    • Built in Priming Pot (Leaf Trap) with clear lexan lid
    • Optional Salt Water Kit - Includes PVC shaft sleeve and PTFE coated S.S. seal w/ SiC faces
      installed in pump by the factory. (additional charge applies)
    • Long life corrosion resistant 316 stainless steel shaft seals
    • 2" FNPT Inlet Port/2" FNPT Discharge Port with Included 2" unions (Qty 2)
    • Safety first out of water (external) pumps help protect you from annoying and potentially dangerous oil or electrical leaks.
    • 3 Year Limited Manufacturers Warranty (For freshwater applications)
    • Made with care in the U.S.A.

    "C" MEANS CORD INCLUDED IN PRICE represents a 115v, 8’, premade cord

    FOR PUMPS OVER 1 H.P. CAN BE ORDERED : All pumps using 230v power that want a cord custom cord, 230v). CAN BE ORDERED

    These are ordered separately by the foot and 20 amp plug. 

    [Blue Sku] is Old Artesian the New Artesian 2 Replaces. Larger Motor and Larger Priming Pot.

  • SKU H.P. RPM Voltage HZ

    Max Watt/

    AMPS

    AMPS [at 230 Volts@

    MAX Head

    AMPS [at 230 Volts@Max Flow Price

    Shoppingcart

    Usually ships the next business

     

    A2-3/4-HF-C

     

     

     

    3/4 3450 115-230 60 5.6 2.7@55' 8880 GPH@11'

    $943.00

    FREE SHIPPING

    SUGGESTED RETAIL$1,300.00

    SPRING DISCOUNT $943.00

     

     

     

     

     

    BUY NOW



     

     

     

     


    A2-1-HF-C

     

    1 3450 115-230 60 7.3 3.5@65'

    9840

    GPH@13'

    $1,044.00

    FREE SHIPPING

     

    SUGGESTED RETAIL$1,375.00

    SPRING DISCOUNT $1,044.00

     

     

     

    BUY NOW


     

     

     


    A2-1-1/2-HF

    NO CORD

    ATTACHED

     

     

    1-1/2 3450 230 60 9.0 5.9@54'

    11,400

    GPH@17'

    $1,133.00

    FREE SHIPPING

    SUGGESTED RETAIL$1,375.00

    SPRING DISCOUNT $1,133.00

     

     

     

     

     

    BUY NOW

     

     

     

    A2-2-HF

    NO CORD

    ATTACHED

     

    2 3450 230 60 10.0 5.5@55'

    12,840

    GPH@20'

    $1,255.00

    FREE SHIPPING

    SUGGESTED RETAIL$1,666.00

     

    SPRING DISCOUNT TO $1,255.00

     

     

     

     

     

     

     

     

                       

    ARTESIAN 2 HIGH HEAD [with out Cord]

    [Blue Sku] is Old Artesian the New Artesian 2 Replaces. Larger Motor and Larger Priming Pot.
    SKU H.P. RPM Voltage HZ

    Max Watt/

    AMPS

    AMPS [at 230 Volts@MAX Head Max Flow Price

    Shopping

    cart

    A2-1/2-HF-C

     

    1/2 3450 115/230 60 4.2 2.4@54' 7380 GPH@8'

    $867.00 FREE SHIPPING

     

    SUGGESTED RETAIL$966.00

    SPRING DISCOUNT $867.00

     

     

     

    BUY NOW

    A2-3/4-HF-C

     

    3/4 3450 115/230 60

     

    L;;L'5.6

    3.2@70'

    7140

    GPH@8'

    $943.00

    FREE SHIPPING

     

    SUGGESTED RETAIL$1,255.00

    QUICKLY DISCOUNTED TO $943.00

     

     

     

    A2-1-1/2-HF

    NO CORD

    ATTACHED

     

    1-1/2 3450 115/208-230 60 9.1 5.5@83'

    11400

    GPH@17'

    $1,133.00

    FREE SHIPPING

     

     

     

    SUGGESTED RETAIL$1,433.00

    QUICKLY DISCOUNTED TO $1,133.00

     

     

     

     

    BUY NOW

     

    A2-2-HF

    [A2-HF-HH]

    NO CORD

    ATTACHED

     

     

    2   230 60 9.9 5.0@86'

    12840

    GPH@20'

    $ 1,255.00

    FREE SHIPPING

     

     

    SUGGESTED RETAIL$1,955.00

    QUICKLY DISCOUNTED TO $1,255.00

     

  • VARIBLE SPEED PUMPS
  • VARIBLE SPEED PUMPS Price Shoppingcart

    AP1.6N-HF [ 0-1.65HP, 1 Ø TEFC, 60HZ, 115/230V, 3600 RPM] PUMP

    OR

    HH-DAF PUMP

    $1901.50

    [58]

    FREE DELIVERY

     

    AP2.7N-HF [0-2.7HP, 1 Ø TEFC, 60HZ, 230V, 3600 RPM N SERIES] PUMP

    OR

    HH-DAF PUMP

    $2,491.00

    [66]

    FREE

    DELIVERY

     

    Description Price Shoppingcart

    CPSET16

    Power Cord 16Awg 115v. (1725 Rpm, 1/2Hp Max.)Performance Pro Artesian Accessories

    $19.50

    BUY NOW

    CPSET12

    Power Cord 16Awg 115v. (3450 Rpm, 1Hp Max.)Performance Pro Artesian Accessories

    $19.50

     

SKU
Item
Description
Price
Shoppingcart
 
APC-50 # Quick Clamp Clamp Ring for Volute $44.00 BUY NOW 
ALL-40 # lID LEXAN LID FOR VOLUTE $33.00 BUY NOW 
ABL-30 # Lid O Ring O-RING FOR LEXAN LID $12.00 BUY NOW 
AAS-2-20 # STRAINER STRAINER BASKET FOR VOLUTE $29.00 BUY NOW 
APV-2-10 # VOLUTE VOLUTE HOUSING [POLYPROPYLENE] $191.00 BUY NOW 
APD-06 # Diffuser O-Ring O-RING FOR DIFFUSER NOSE $10.00 BUY NOW 
APD-2-08 #   DIFFUSER LARGE VANE [for #4-7 Impellers] $72.00 BUY NOW 
APD-09 #   DIFFUSER XL VANE [for #8-9 Impeller $76.00 BUY NOW 
ASI-09 # Set Screw with Gasket IMPELLER REVERSE SET SCREW WITH GASKET $8.00 BUY NOW 
ANI-44.92 IMPELLER IMPELLER #4 FOR A2-1/4-47 $88.00 BUY NOW 
ANI-64.92   IMPELLER #6 FOR A2-1/4-58 $88.00 BUY NOW 
ANI-75.12   IMPELLER #7 FOR A2-1/3-63 $88.00 BUY NOW 
ANI-2-34.00   IMPELLER #3 FOR A2-1/2-HH $88.00 BUY NOW 
ANI-2-34.50   IMPELLER #3 FOR A2-3/4-HH $88.00 BUY NOW 
ANI-2-44.35   IMPELLER #4 FOR A2-1/8-39 $88.00 BUY NOW 
ANI-2-44.70   IMPELLER #4 FOR A2-1-HH $88.00 BUY NOW 
ANI-2-54.80   IMPELLER #5 FOR A2-11/2-HH $88.00 BUY NOW 
ANI-2-64.80   IMPELLER #6 FOR A2-2-HH $88.00 BUY NOW 
ANI-2-73.95   IMPELLER #7 FOR A2-3/4-HF $88.00 BUY NOW 
ANI-2-74.20   IMPELLER #7 FOR A2-1-HF $88.00 BUY NOW 
ANI-2-74.95   IMPELLER #7 FOR A2-3-HH $88.00 BUY NOW 
ANI-2-84.22   IMPELLER #8 FOR A2-11/2-HF $88.00 BUY NOW 
ANI-2-85.12   IMPELLER #8 FOR A2-1/2-76 $88.00 BUY NOW 
ANI-2-94.15   IMPELLER #9 FOR A2-2-HF $88.00 BUY NOW 
ANI-2-94.40   IMPELLER #9 FOR A2-3-HF $88.00 BUY NOW 
MPS513 #   316 STAINLESS STELL CARBON VS. CERAMIC WITH BUNA $39.00 BUY NOW 
MPS-517 #   TEFLON COATED S.S. WITH SIC FACES, BUNA TRIM $120.00 BUY NOW 
APO-3-20 #   0-RING FOR BRACKET $15.00  
PNO-02 #   BRACKET BORE O-RING $12.00 BUY NOW 
APS-3-30 # BRACKET BRACKET [POLYPROPYLENE $109.00 BUY NOW 
APF-3-10 # MOTOR BASE PLASTIC MOTOR BASE WITH CRADLE $65.00 BUY NOW 
MPH-30 # HARDWARE STAINLESS STEEL HARDWARE SET $45.00 BUY NOW 
MPF-2-200 # UNION ASSEMBLY QUICK CONNECTS WITH 2" FITTING $23.50 BUY NOW 
PPD-10 # DRAIN PLUG POLYPROPYLENE DRAIN PLUG WITH BUNA O-RING $5.00 BUY NOW 
ArtesianPro Low RPM

FREE SHIPPING

SKU
Description
Price
Shoppingcart
789
Cord & Plug 16 AWG, 8ft. cord, 115 V plug [1725 rpm, 1/3 h.p. Max.]
$19.99
BUY NOW
253
Cord & Plug 12 AWG, 8ft. Cord, 115V Plug [3450 rpm, 1HP max.]
$27.99
BUY NOW
 

.  SALT WATER KIT

 
$121.00

NOTE; The -C. represents a 115v, 8’, premade cord

All pumps using 230v power that want a cord use the indicator of -CC (custom cord, 230v).

These are ordered separately by the foot and 20 amp plug. 

 

ArtesianPro High Flow

* High Flow, High RPM

* Optional 12 AWG 8' Cord@$13.30 [Please Specify]

* ODP Motor

* 3 Year Warranty

 

SKU H.P. RPM Voltage HZ

Amps

@230

Max Head
Max flow
Price

Shopping

cart

AP1/2-HF-C

 

1/2 3450 115/230
60
4.3 38' 8880GPH@3'

$1,149.00

FREE SHIPPING

SUGGESTED RETAIL$1,450.00

QUICKLY DISCOUNTED TO $1,149.00

 

 

AP3/4-HF-C

 

 

 




3/4 3450 115/230
60
5.5 40'

10680GPH@5'

$1,235.00

FREE SHIPPING

SUGGESTED RETAIL$1,666.00

QUICKLY DISCOUNTED TO $1,235.00

 

 

 

BUY NOW

AP1-HF-C

 

 

 

 

1 3450 115/230
60
7.9 45

13,380

GPH@7'

$1,388.00

FREE SHIPPING

SUGGESTED RETAIL$1,575.00

QUICKLY DISCOUNTED TO $1,388.00

 

 

 

 

BUY NOW 

AP1-1/2HF-C

 

 

 

1-1/2 3450
230
60
9.2 51

13,980

GPH@8''

$1,439.00

FREE SHIPPING

SUGGESTED RETAIL$1,775.00

QUICKLY DISCOUNTED TO $1,439.00

 

BUY NOW 

AP2-HF-C

 

 

 

 

 

2 3450
230
60
10.2 54' 15,540@10'

$1,1586.00

FREE SHIPPING

 

SUGGESTED RETAIL$1,775.00

QUICKLY DISCOUNTED TO $1,586.00

 

 

 

 

BUY NOW 
     
     

 

 

 

AP5-HF-C

 

 

 

 

 

 

5 3450
230
60
17.6 68'.

20,400

GPH@16'

$2,035.00

FREE SHIPPING

 

 

SUGGESTED RETAIL$2,335.00

QUICKLY DISCOUNTED TO $2,035

 

BUY NOW
 

 

___________________________________________________________________