** Dosage rates vary by wide margin due to the varying degree of resistance different strains of algae have. Below are a few suggestions based on your pond size and whether you are treat an existing algae or working to keep it away.
Pond Size |
Curative Rate Application |
Maintenance Application Rate |
50 Gallons |
1 Tbsp |
0.25 tsp |
100 Gallons |
1.5 Tbsp |
0.5 tsp |
500 Gallons |
0.5 Cup |
1 Tbsp |
1,000 Gallons |
1 Cup |
1.5 Tbsp |
5,000 Gallons |
5 Cups |
0.5 Cup |
10,000 Gallons |
10 Cups |
1 Cup |
Here's some additional information on Green Clean from BioSafe Systems, the product manufacturer.
The Benefits of GreenClean Include:
Works on contact to control all types of algae
Results can be seen within minutes
Professional Strength formula
An EPA-registered, non-copper based algaecide
Organic Listed by the Organic Materials Review Institute (OMRI)
Frequently Asked Questions
Q: Where can I use GreenClean?
A: GreenClean can be used in any water feature such as water gardens, ornamental waterfalls, fountains, and bird baths.
Q: Is GreenClean safe for animals?
A: Yes. GreenClean granules are non-hazardous to animals such as birds, bees, and even your pets once diluted in water. KLM note: BioSafe indicates that Green Clean is safe for fish up to double the recommended dosage rate. Still caution should be used and directions must be followed to ensure safety. KLM does not recommend using Green Clean to treat green water or to treat an entire pond for algae problems. We now only use Green Clean for spot control of algae masses and have had excellent results and no safety issues.
Q: Will GreenClean harm my plants?
A: No. However, GreenClean’s concentrated granules may leave contact burn marks if left sitting on plant leaves.
Q: How does GreenClean work?
A: GreenClean works through a powerful oxidation reaction, breaking down algae cells on contact.
Q: How quickly does GreenClean work?
A: GreenClean begins working within 60 seconds of application. Results can be seen in 24-48 hrs.
Q: Does pH matter in how Green Clean works?
A: Ideally you should test your pH prior to use. Green Clean will work best in a pH range between 6.8 to 7.8.
Q: Has GreenClean been tested?
A: Yes. GreenClean is registered by the Environmental Protection Agency (EPA) and Organic listed by OMRI. GreenClean underwent extensive research and testing to be proven an effective algaecide.
KLM Solutions recommends that you read the following MSDS information from the manufacturer before purchasing to ensure that your comfortable with using Green Clean.
WARRANTY
This material conforms to the description on the label and is reasonably fit for the purposes referred to in the directions for use. Timing, unfavorable temperatures, water conditions, presence of other materials, method of application, weather, watering practices, nature of soil, disease problem, condition of crop, incompatibility with other chemicals, pre-existing conditions and other conditions influencing the use of this product are beyond the control of the seller. Buyer assumes all risks associated with the use, storage, or handling of this material not in strict accordance with directions given herewith. NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS OR MERCHANTIBILITY IS MADE. |
*Buyer assumes all risks and responsibility associated with the use, storage, or handling of all pond treatments that may be purchased from KLM Solutions LLC. **
|
Noncopper based algaecide
