The Hakko HK-60L Linear air pump represents a top of the line Linear Air Compressor with 3 year warranty.
The Hakko Air Pump 60 will deliver a maximum of 82 Liters Per Minute.
63 watts used !!
Suitable for koi ponds up to 6000 gallons
HAKKO HK60L LINEAR AIR PUMP
This is a cast iron body style. It is a small unit with surprisingly high output. Ideal water depths between 2 feet to 12 feet. Shut off depth is 18 feet deep. The Hakko air pumps are built to last with a very durable body and mechanics meaning years and years of everlasting quality airflow.
Very low noise 32/38 dB at 1 meter, low power consumption, Silent operation, Completely oil free, Overload protection with Auto off/on switch for overheat situations. Low power consumption. UL and CE listed for outdoor use.
110 Volt is standard. 220 volt is by special order.
The outlet fitting is approx. 5/8" O.D. 6 foot power cord supplied.
No oil needed for lubrication making the Hakko easy to maintain.
The Hakko HK-80L Linear air pump represents a top of the line Linear Air Compressor with 3 year warranty.
The Hakko Air Pump 80 will deliver a maximum of 100 liters per minute.
85 watts used !!
Suitable for ponds up to 8,000 gallons.
HAKKO HK80L LINEAR AIR PUMP
Suitable for ponds up to 8,000 gallons.
This is a cast iron body style. It is a small unit with surprisingly high output. Ideal for water depths between 2 feet to 13 feet deep. Shut off depth is 19 feet deep. The Hakko air pumps are built to last with a very durable body and mechanics meaning years and years of everlasting quality airflow.
Very low noise 32/38 dB at 1 meter, low power consumption, Silent operation, Completely oil free, Overload protection with Auto off/on switch for overheat situations. Low power consumption. UL and CE listed for outdoor use.
110 Volt is standard. 220 volt is by special order.
The outlet fitting is approx 5/8" O.D. 6 foot power cord supplied.
No oil needed for lubrication making the Hakko easy to maintain.
The Hakko HK-100 Linear air pump represents a top of the line Linear Air Compressor with 3 year warranty.
The Hakko Air Pump 100 will deliver a maximum of 120 Liters Per Minute .
116 watts used !!
Suitable for ponds up to 10,000 gallons
HAKKO HK100L LINEAR AIR PUMP
Hakko Air Pumps are sleek in design.
This is a cast iron body style. They are small units with a surprisingly high output. Ideal water depths between 2 feet to 12 feet deep. Shut off depth is 16 feet deep. The Hakko air pumps are built to last with a very durable body and mechanics meaning years and years of everlasting quality airflow.
High Efficiency
Simple Maintenance
Completely Oil-Free
Overload Protection
Silent Operation
Long Life Expectancy
Hakko air pumps utilize linear- motor theorem to reduce power consumption during full operation. Units are extremely quite utilizing spectrum analysis technology in order to decrease any mechanical noise.
110 Volt is standard. 220 volt is by special order.
No oil needed for lubrication making the Hakko easy to maintain.
The outlet fitting is approx 5/8" O.D. 6 foot power cord supplied
The Hakko HK-120 Linear air pump represents a top of the line Linear Air Compressor with 3 year warranty.
The Hakko Air Pump 120 will deliver a mximum of 138 Liters Per Minute.
Only 126 watts !!
Suitable for ponds up to 12,000 gallons.
This is a cast iron body style. It is a small unit with surprisingly high output. Ideal for water depths between 4 to 12 feet deep. Shut off depth is approximately 18 feet deep. The Hakko air pumps are built to last with a very durable body and mechanics meaning years and years of everlasting quality airflow.
Very low noise 32/38 dB at 1 meter, low power consumption, Silent operation, Completely oil free, Overload protection with Auto off/on switch for overheat situations. Low power consumption. UL and CE listed for outdoor use.
110 Volt is standard. 220 volt is by special order.
No oil needed for lubrication making the Hakko easy to maintain.
The outlet fitting is approx 1" O.D. 6 foot power cord supplied
Model / Item
HK-120
Application:
Features & Benefits:
Rated Voltage (V)
AC 115 (AC 110/115/120 or
AC 220/230/240)
Aeration
Liquid agitation
Mamut pump for air lift
Aerobic treatment
High Efficiency
Simple Maintenance
Completely Oil-Free
Overload Protection
Silent Operation
Long Life Expectancy
Power Supply Frequency (Hz)
56 / 60
Normal Pressure Bar (psi)
0.20 (2.84psi)
Rated Performance lpm (cfm)
121
Power (W)
126
Noise Level (dB)
42
Maximum dimensions:
Certificate:
Closed Pressure / Bar
0.54
Closed Pressure / psi
7.8
260 x 199 x 244 mm
CUL
CE
JET
Weight (kg)
8.9 / 19.6
SKU
DESCRIPTION
PRICE
SHOPPING CART
HK120
HAKKO 120
$375.00
OUT OF STOCK
The graph below shows water depth in feet.
The Hakko 150L, 200L, and 250L are the latest air pumps in our line of Hakko Linear Air Pumps.
These high volume pumps are suitable for ponds or lakes larger than 12,000 gallons.
Very rugged, reliable and weather resistant.
Outlet fitting is 1" OD.
Power cord is 80 inches long (6.5 ft).
Cast iron body style.
3 year Limited Warranty.
110 Volt is standard. 220 volt is by special order.
HK 150L has a maximum air flow of 210 liters per minute. Max depth 13 ft deep.
HK 200L has a maximum air flow of 290 liters per minute. Max depth 12 ft deep.
HK 250L has a maximum air flow of 370 liters per minute. Max depth 13 ft deep.
Outlet fitting is 1" O.D. 6 foot power cord supplied
is designed to reduce back pressure on your system.
The brass manifold connects to your pump via a 3/4" barb.
The Hakko Air Pump outlet fitting comes with a white L Tube that will connect directly to the 2 way Manifold. The outlets on the manifold are 3/8" barb.
Use the 2 Way Heavy Duty Manifold for Hakko Air Pumps HK 25L through HK 80L.
Use the 4 Way Heavy Duty Manifold for Hakko Air Pumps HK100L to HK120L.
SKU
Description
Price
Shoppingcart
SC2-38-MAH58
2 Way Heavy Duty Air Manifold 3/8" BARB]
Use the 2 Way Heavy Duty Manifold for Hakko Air Pumps HK 25L through HK 80L.
LOW OPERATION COST,IMPROVES WATER QUALITY,INCREASES OXYGEN LEVEL,REDUCES ALGAE
TWO YEAR WARRANTY
TYPE B NOZZLE
SKU: MWT200
$110.00
MATALA FLOATING FOUNTAIN REPLACEMENT - TYPE B NOZZLE Type "C" For Changing the Fountain Pattern on the Matala Floating Fountain. Produces spray pattern shown in picture above. Brass with 1-1/2" female threads
TYPE C NOZZLE
SKU: MWT201
$187.00
MATALA FLOATING FOUNTAIN REPLACEMENT - TYPE C NOZZLE Type "C" For Changing the Fountain Pattern on the Matala Floating Fountain. Produces spray pattern shown in picture above. Brass with 1-1/2" female threads
TYPE D NOZZLE
SKU: MWT201
$97.00
MATALA FLOATING FOUNTAIN REPLACEMENT - TYPE D NOZZLE Type "D" For Changing the Fountain Pattern on the Matala Floating Fountain. Produces spray pattern shown in picture above. Brass with 1-1/2" male threads
MATALA 3-LED LIGHTS WITH CONTROL UNIT FOR THE FLOATING FOUNTAIN
SHU MWT204
$640.00
LIGHTING KIT FOR FLOATING FOUNTAIN KIT 3 LED LIGHTS WITH MOUNTING BRACKETS FOR ATTACHING TO MATALA FLOATING FOUNTAINS. WEATHER PROOF CONTROL UNIT AND 65 FEET OF CABLE INCLUDED
WINTER CARE
Keep your pond water Open For Winter with an Air pump and air Diffusers.
Multipurpose Flexible PVC Tube for Plumbing Pond filters and water pumps. Durable reinforced pvc
,Resist crushing ideal for under ground installion. Easy to connect, disconnect and replace for convenient pond
plumbing. Reinforced PVC pipes resist crushing yet flexible enough for convenient handling and installation.
Connect the multipurpose PVC tubing to pond filters, fountains, and other pond equipment to transport water
from your water pump.
Air Disfuser Disks for Ponds
Matala 7" Disc with Weighted Base (MPN MD-7W) Heavy duty membrane will last for years
Fine Bubble Membrane Air Diffusers (BHB-MD225/MD310)
Lowest back pressure in the market
Features and benefits:
Heavy-duty membrane with highly durable base which is constructed of molded polypropylene.
Precision perforated I-shaped slits open when airflow is present and close when airflow is stopped. In this way slits resist tearing, and stay cleaner longer.
A standard 3/4" Male PT pipe thread allows convenient connection.
Stainless steel 304 Clamping Ring holds the membrane firmly in place.
Triple O-rings support the center of the membrane when airflow is absent.
Model
BHB-MD225
BHB-MD310
Air flow (cfm) / (lpm)
1.4~4.2 / 40~120
3.8~7.0 / 100~200
Disc body
ABS
Nylon+fiberglass
Membrane
EPDM
Fixation
304 St. Steel clamping ring
Connection
3/4" Male PT
Dimensions: Diameter (in) / (mm)
8.82 / 224
12.2 / 310
Weight (lbs) / (g)
0.77 / 350
1.99 / 900
SKU
Product
Price
Order
BHB-MD-310
12" Single Membraned Diffuser
Our Matala Air Discs are available in a 9 inch or 12 inch diameter and are designed for the wastewater treatment industry to very high standards. The air pore size in the rubber membrane is designed to give a medium size bubble which will not put any significant back pressure on the system. In fact this special air disc only adds less than 6 inches of water depth back pressure. The 3/4" male thread makes it easy to attach to your feed line.
The 9 inch disc is capable of safely handling air flows of 25 lpm to 80 lpm.
The 12 inch disc is capable of safely handling air flows of 25 lpm to 160 lpm.
The disc is very low maintenance and in some cases NO maintenance. Simply wash the disc with clean water and bleach if it ever needs cleaning. We have some of these air discs in systems now for over 3 years with out trouble or maintenance
Matala offers a 9" membrane air diffuser assembly that features a hollow base that can be filled with sand or gravel. This eliminates the need for bricks and straps to get the diffuser to sink. Available in both a single head or dual head assemblies. Double head handles airflow from 2.8 - 8.4 cfm.
Matala offers a 9" membrane air diffuser assembly that features a hollow base that can be filled with sand or gravel. This eliminates the need for bricks and straps to get the diffuser to sink. Available in both a single head or dual head assemblies. Single head handles airflow from 1.4 - 4.2 cfm
Air Diffuser Base with 9" EPDM Disc Diffuser
MDB11
MDB12
Air Volume
(cfm) / (lpm)
1.4~4.2cfm / 40~120 lpm
2.8~8.4 cfm/ 80~240 lpm
Platform : Diffuser
(q'ty)
1 : 1
1 : 2
Dimensions:LxWxH
(in)
11x10x5
22x11x10
Weight
(lbs)
2.6
4.2
Matala Lake Aeration Diffuser Bases are designed to keep the air discs up off the mud bottom of a lake.
The MDB12 comes complete with two 9" air discs supported above the base. Includes multi-barb for hose connection.
Also available with two 12" air discs (MDB12-12) Call for availability.
The base is heavy duty rugged plastic with soft edges. Fill the base with small gravel and sand and purge of all air bubbles. The base comes with a friendly multi-barb that will allow connection to various sizes of air hose including 3/8", 1/2", 5/8" and 1".
Matala offers a 9" membrane air diffuser assembly that features a hollow base that can be filled with sand or gravel. This eliminates the need for bricks and straps to get the diffuser to sink. Available in both a single head or dual head assemblies.
Dual Air Base w/ Disc
Matala offers a 9" membrane air diffuser assembly that features a hollow base that can be filled with sand or gravel. This eliminates the need for bricks and straps to get the diffuser to sink. Available in both a single head or dual head assemblies.
MDB24 MATALA AIR DISC. BASE DUEL W/4] 9" AIR DISC. FOR LAKES
$245.00
This Matala Air Base is a double weighted base with four 9 inch Air Discs. This Base can be used for lakes with muddy bottoms greater than 3 inches of mud. The Air Discs are held up out of the mud with a riser pipe.
Use this four disc diffuser for Hakko 120L or for one of our Lake Aeration Rocking Piston Compressors.
* AIR FLOW RATE: 5.6-16.8 CFM/160-480 LPM
The four 9 inch Air discs can handle air flow rates from 4.0 cfm to 16.0 cfm.
This complete air kit is perfect for small ponds under 2000 gallons. The 6 watt dual outlet air pump is capable of pumping out 9.5 liters of air per minute. This is the equivalent of .34 cu. ft. per minute / 580 cu. in. per minute! The high quality silicone air discs are self-weighted and self-righting! They always land right side up! And they are super easy to clean!
A very low maintenance system and affordably priced. The complete kit includes:
- 6 watt dual outlet air pump, 9.5 lpm / .34 cfm.
- 2 weighted silicone air diffuser discs, 3.5 inch diameter, self-righting and easy cleaning.
- 2 lengths of black air line tubing, 60 feet total!
- 2 check valves.
- rebuild diaphragm kits are readily available.
- 3 year limited warranty.
SKU
Description
Price
Shoppingcart
MEA MNI
Mini EZ Air Pro 2000 Kit
9LP Air Pump + 2 x MD-3W Air Diffuser + 60ft 5/32" Air Hose
$59.00
MEA PRO 6 PLUS KIT
Click Icon to Download PDF File -
The Matala EZ Air Pro 6 Plus Kit is designed for ponds between 15,000 to 45,000 gallons depending on your fish load.
The MEA Pro 6 Plus Kit includes:
Matala HK100L Air Pump.
-Air flow up to 119 lpm or 4.2 cfm.
-Maximum water depth 16 feet.
-Suggested water depth up to 10 feet.
-Only 110 watts!
-For Ponds between 15,000 to 45,000 gallons.
Two MDB22 Weighted Base with 9 inch Disc Diffusers.
-Award winning design.
-A total of four 9 inch EPDM Disc Diffusers with weighted base, (2 x MDB22).
-Produces medium size bubbles.
-Lowest back pressure diffuser on the market for maximum air flow and longest life for the air pump.
-Self Cleaning, no maintenance required. Very long lifetime.
-Weighted Base is fish friendly. Two Double Bases support two disc diffusers each.
-Hose clamp connectors included.
Weighted Air Hose
-Two sections of 30 feet high quality 1/2" weighted hose.
-Will not kink or crush.
2 Way Heavy Duty Manifold
-High Quality Professional looking 2 way x 1/2" manifold with control valves.
-3/4" connection to the Hakko with two 1/2" barbs connecting to the hose.
SKU
Description
Price
Shoppingcart
MEA PRO 6 PIUS
MATALA EZ AIR PRO 6 PLUS KIT
HK-100L Air Pump + 2 x MDB22 Air Diffuser + 2 Way Valve
+ 60ft 1/2" Weighted Air Hose
$879.00
MY FAVORITE
Air Diffuser Tubing
A simple, effective, reliable and economic way to aerate your aquaculture farms.
Features and benefits:
It is made from high-efficiency rubber with special designed pore size and its numerous pore distribuiton to create maximum fine bubbles which slowly release in the water. The air flow is 0.45-1.1 cfm/ft (0.3-1 lpm/cm).
Durable with low start up, maintenance and replacement cost.
Specification/ Model
MDT-1/2"
Dimension length (ft) / (M)
500 / 150
Dimension:ID (in) / (mm)
1/2 / 12.7
Dimension:OD (in) / (mm)
0.77 / 19.5
Package (in) / (mm)
23.6x23.6x11.8
600x600x300
N.W. (lbs) / (kg)
44.1 / 20
G.W. (lbs) / (kg)
48.5 / 22
500' ROLL X 1/2" AIR DIFFUSER TUBING
$316.00
250' ROLL X 1/2" AIR DIFFUSER TUBING
$
Weighted Air Hose
An Ideal air supply tubing for pond and lake self-sinking, non-kinking installation.
Features and benefits:
It is made from thick walled PVC with some flexibility, suitable for any aquatic environment such as freshwater, salt water, wastewater or retention ponds.
Good weather resistance even in cold weather. Available in 3/8”, 1/2”, 5/8”, 3/4”, and 1” for a wide variety of aeration systems from small pond to large lake.
Crash and kink resistant.
WAH-3/8/20
Weighted Air Hose 3/8" diameter x 20' roll
$25.00
WAH-3/8-50
Weighted Air Hose 3/8" diameter x 50' roll
WAH-1/2-30
Weighted Air Hose 1/2" diameter x 30' roll
$64.00
$60.00
7
Aeration System
This complete Matala aeration system includes all the features of our Rocking pistone compressor and it is built into
a heavy duty cabinet. The locking cabinet is landscape green color and designed for outdoor extreme weather conditions.
The cabinet stands on a solid support base to maintain a level installation. Within the cabinet we have added a cooling fan
with cross flow ventilation. The compressor plugs into a built in GFI outlet. All components are protected within.
The heat protection hose leads externally and all you have to do is connect your air hose. Very simple to install and operate.
The cabinet should be located above pond water level and flood zone and within 50 feet of the shore. Do not bury.
Features and benefits
Rocking Piston Compressor includes air filter and air manifold system.
Full locking metal cabinet, landscape green color.
Support Base.
Built in GFI outlet.
Cross flow ventilation fan.
Easy install and operation.
Heavy weather resistant.
1/4 HP MPC-60C1
220 V
1 ACRE POND
1/2 HP MATALA
220 V
MPC-120C2 DUAL COMPRESSORS W/CABINET ONLY
3/4 HP MATALA
220 V
MPC-200C1 COMPRESSOR W/ CABINET ONLY
$ 814.00
$1,577.00
$1,331.00
This complete Matala aeration system includes all the features of our MPC-60C and it is built into a heavy duty cabinet. The locking cabinet is landscape green color and designed for outdoor extreme weather conditions.
The cabinet stands on a solid support base to maintain a level installation. Within the cabinet we have added a cooling fan with cross flow ventilation. The cabinet should be located above pond water level and flood zone and within 50 feet of the shore. Do not bury.
The compressor plugs into a built in GFI outlet. All components are protected within. The heat protection hose leads externally and all you have to do is connect your air hose. Very simple to install and operate.
Features include:
1/4 HP compressor with 2 way manifold system (MPC-60C).
Full locking metal cabinet, landscape green color.
Support Base.
Built in GFI outlet.
Cross flow ventilation fan.
Easy install and operation.
Heavy weather resistant.
To help prevent overheating, please follow these recommendations:
only use in water less than 50 feet deep
keep air hoses less than 100 feet long
use 2 way manifold and 2 hoses
1/2 HP Rocking Piston Compressor Complete (MPC-120C) with Cabinet.
This complete Matala aeration system includes all the features of our MPC-120C and it is built into a heavy duty cabinet. The locking cabinet is landscape green color and designed for outdoor extreme weather conditions. The cabinet stands on a solid support base to maintain a level installation. Within the cabinet we have added a cooling fan with cross flow ventilation. The compressor plugs into a built in outlet. All components are protected within. The heat protection hose leads externally and all you have to do is connect your air hose. Very simple to install and operate.
The cabinet should be located above pond water level and flood zone and within 50 feet of the shore. Do not bury.
Features include:
1/2 HP compressor with 3 way manifold system (MPC-120C).
Full locking metal cabinet, landscape green color.
Support Base.
Built in GFI outlet.
Cross flow ventilation fan.
Easy install and operation.
Heavy weather resistant.
To help prevent overheating, please follow these recommendations:
only use in water less than 50 feet deep
keep air hoses less than 100 feet long
use 3 way manifold and 3 hoses
THis complete Matala aeration system includes all the features of our MPC-200C and it is built into a heavy duty cabinet.
The locking cabinet is landscape green color and designed for outdoor extreme weather conditions. The cabinet stands on a solid support base to maintain a level installation. Within the cabinet we have added a cooling fan with cross flow ventilation. The compressor plugs into a built in GFI outlet.
All components are protected within. The heat protection hose leads externally and all you have to do is connect your air hose. Very simple to install and operate.
The cabinet should be located above pond water level and flood zone and within 50 feet of the shore. Do not bury.
Features include:
3/4 HP compressor with 4 way manifold system (MPC-200C).
Full locking metal cabinet, landscape green color.
Support Base.
Built in GFI outlet.
Cross flow ventilation fan.
Easy install and operation.
Heavy weather resistant.
To help prevent overheating, please follow these recommendations:
only use in water less than 50 feet deep
keep air hoses less than 100 feet long
use 4 way manifold and 4 hoses
1/4 HP MATALA MPC-60C1
COMPRESSOR KIT-UPTO 1 ACRE
220 V
$1,141.95
Includes:
MPC-60C1; 1/4Hp Rocking Piston Compressor with oil filled pressure gauge and pressure releif valve, 2 way valve manifold, cooling fan, GFI outlet, all inside the protective locking cabinet.
200 feet of 3/8" heavy duty sink air hose.
Two air bases with 9" air disc diffusers, MDB 11
SEE MATAL AIR DISK BASES AND WEIGHTED AIR LINE HOSES ON THIS PAGE
SEE MATAL AIR DISK BASES AND WEIGHTED AIR LINE HOSES ON THIS PAGE
WEIGHTED AIR LINE HOSE
This self sinking air hose is designed to sink to the bottom of your pond without additional weight. It is 0.650 inch (approx 5/8") inside diameter
and 1.2" (approx 1-1/4")outside diameter. The black color easily disguises it on the pond bottom.
You may purchase it in 1 foot increments or 100 foot rolls. Use a 5/8 in. barb to conect to your diffusers.
SKU
Description
Price
Shoppingcart
MAL11
100-FT WEIGHTED AIR LINE HOSE 3/8" IDSinking Air Hose
