|
 Cetus Sieve Pre Filter, Pump Fed or Gravity Fed |
|
CETUS SIEVE MANUAL
The Cetus Mark II is THE SAME CETUS SIEVE.
Cetus Mark II
The Cetus Mark II sieve IS THE CETUS SIEVE , bow screen pre-filter, made using the latest rotational molding technology. With all of its benefits and build quality, it is undoubtedly the best of its kind on the market today in terms of quality and performance! It is designed to efficiently and effectively remove large amounts of mechanical waste from a pond. It can be set-up gravity or pump fed and has many benefits over the original bow screen technology.
This Cetus has a variable inlet height using the unique patented Pondflow regulation system – for use when gravity fed. This allows water levels within the pond to drop without causing the circulating pump to be starved of water. The Cetus will allow a skimmer or a bottom drain to accept vast amounts of waste without excessive cleaning needed to be carried out. The water must then be pumped to either a normal filter above pond level (Nexus Eazy/Eazy Pod) or to a pressurized filter.
If pump fed, the sieve is placed above pond water level and then the exit water is gravity dropped into your main filter.
It is advised that all pressurized filters be pre-filtered using a Cetus to reduce excessive backwashing and maintenance due to heavy solids.
- Can be gravity or pump fed (please specify)
- Perfect fit screen so no waste can bypass
- Totally reliable and simple to install
- Plug and Play – comes with flexible boots to connect to pipe work
- Greatly reduced backwashing / maintenance of pressurised filters
- Robust one piece mould –no welded joints – no leaks!
- Large waste collection area which slopes to sump outlet
- Ideal for mechanically filtering skimmer lines
- Patented float that gives constant flow for gravity-fed level fluctuations
- Maximum flow rate 18,000 litres per hour (4,750 US GPH)
- Tri-slot 300 micron wedge wire screen in 316L stainless steel on 100% of surface area
- Increased levels of oxygen
|
|
|
This Cetus has a variable inlet height using the unique patented Pondflow regulation system – for use when gravity fed. This allows water levels within the pond to drop without causing t
-
Max Flow: |
4,750 US gallons/hr |
Inlet: |
Gravity-fed 4 inch, Pump-fed 2 inch |
Outlet: |
Gravity-fed 2 inch, Pump-fed 4 inch |
Outlet Waste: |
3 inch |
Height: |
37.2 inches |
Length: |
33.5 inches |
Width: |
22.4 inches |
Screen: |
300 microns |
THE CETUS SIEVE THAT FIRST CAME OUT:
The circulating pump to be starved of water. The Cetus will allow a skimmer or a bottom drain to accept vast amounts of waste without excessive cleaning needed to be carried out. The water must then be pumped to either a normal filter above pond level (Nexus Eazy/Eazy Pod) or to a pressurized filter.
If pump fed, the sieve is placed above pond water level and then the exit water is gravity dropped into your main filter.
It is advised that all pressurized filters be pre-filtered using a Cetus to reduce excessive backwashing and maintenance due to heavy solids.
- Can be gravity or pump fed (please specify)
- Perfect fit screen so no waste can bypass
- Totally reliable and simple to install
- Plug and Play – comes with flexible boots to connect to pipe work
- Greatly reduced backwashing / maintenance of pressurised filters
- Robust one piece mould –no welded joints – no leaks!
- Large waste collection area which slopes to sump outlet
- Ideal for mechanically filtering skimmer lines
- Patented float that gives constant flow for gravity-fed level fluctuations
- Maximum flow rate 18,000 litres per hour (4,750 US GPH)
- Tri-slot 300 micron wedge wire screen in 316L stainless steel on 100% of surface area
- Increased levels of oxygen
Max Flow: |
4,750 US gallons/hr |
Inlet: |
Gravity-fed 4 inch, Pump-fed 2 inch |
Outlet: |
Gravity-fed 2 inch, Pump-fed 4 inch |
Outlet Waste: |
3 inch |
Height: |
37.2 inches |
Length: |
33.5 inches |
Width: |
22.4 inches |
Screen: |
300 micron |
|
Cetus Sieve - Gravity Fed Pre-Filter
Max Flow 4,750 GPH, 4" Inlet, 1.5" Outlet, 3" Waste Outlet, Removable 300 Micron Screen
37.2" H x 22.4" W x 33.5" L |
Cetus Sieve - PUMP Fed Pre-Filter
Max Flow 4,750 GPH, 1.5" Inlet, 4" or 3" Outlet, 3" Waste Outlet, 300 Micron Screen
37.2" H x 22.4" W x 33.5" L |
|
Description. |
Shopping Cart |
1884 |
|
|
BUY NOW
FREE DELIVERY
|
1954 |
|
|
BUY NOW FREE DELIVERY |
.
THIS IS HOW YOU CAN PLUMB THE GRAITY FED TO YOUR POND.
RIGHT 3" PVC OUTLET TO POND 937-475-1230
LEFT 2" PVC OUTLET TO POND
CENTER 3" PVC WASTE LINE
SKU |
Description |
Price |
Shoppingcart |
| Screen-300 |
Cetus 300 Micron Screen Replacement |
$740.00
|
BUY NOW
FREE DELIVERY
|
| Screen -200 |
Cetus 200 Micron Screen Upgrade |
$
|
|
| |
|
|
|
CETUS SIEVE GRAVITY FED OR PUMP FED
iAll pressurized filters be pre-filtered using a Cetus to reduce excessive enance due to heavy solids.
- Can be gravity or pump fed (please specify)
- Perfect fit screen so no waste can bypass
- Totally reliable and simple to install
- Plug and Play – comes with flexible boots to connect to pipe
- Greatly reduced backwashing / maintenance of pressurised filters
- Robust one piece mould –no welded joints – no leaks!
- Large waste collection area which slopes to sump outlet
- Ideal for mechanically filtering skimmer lines
- Patented float that gives constant flow for gravity-fed level fluctuationsn 100% of surface area
|
